Roofing Tin Plate

Roofing Tin Plate

Roofing Tin Plate was a popular material in the early years of the 20th century. Unlike copper, tin plate requires little maintenance. It can be painted green or red to resemble the patina of copper. The older form of tin roofing was called terne plate. This material was iron that was dipped in an alloy to make it rust-resistant and dull in appearance. Despite these differences, these two materials are often confused in historic documentation.

The N. & G. Taylor Company advertised tin plates in the “Old Style” style. The advertisements showed an old-fashioned kitchen with a spinning wheel and kettle used to cook in a fireplace. A flintlock rifle and candlestick stood nearby, and a white-haired grandfather watched over his grandson from a tree. Those who applied were sent a free book. The tin plate was made by the company, which was located in Philadelphia.

Roofing Tin Plate

Tin Plate Steel

In 1892, a group of tinplate makers established the Tinned Plate Manufacturers’ Association. The TPMA, which was formed the same day as the American Society for Aesthetics, set up the standard for tinplate. The association had a list of tinplate works and produced several tinplate-roofing projects. During the nineteenth century, the first tin plate was produced in Pennsylvania.

Tin plate is also known as terne. It is made of a 50/50 mixture of tin and zinc, and is available in 439 and 316L stainless steel. It has superior corrosion-resistance and is much easier to solder. It is also more malleable and has an elegant gray patina finish after a short period of exposure to the elements. This material was once the sole manufacturer of the “Ye Old Style” redipped leaded Roofing Tin Plate.

Tin Plating Specification

The N. & G. Taylor Company advertised their Roofing Tin Plate with an illustration of an old-style kitchen with a spinning wheel, kettle in a fireplace, and a white-haired grandfather watching over his grandson. The advertisement included an application form for the company and a book about the tinplates. If you were interested in buying tinplate, you can get a free sample by contacting the firm.

The Tinned Plate Manufacturers’ Association listed tinplate works in 1892. Since then, the TPMA has compiled a list of the works that made tinplate. In 1905, the association was founded in Philadelphia. Afterwards, it was the only manufacturer of “Ye Old Style” redipped leaded roofing tinplate. The tinplates are used for roofs, walls, and windows.

The tin plate goes through six different processes before it becomes crystalline. The tin sheets are first brushed to remove excess tin before being dipped in tin. Next, they go through a hot pot that contains tin and water. Then, they are placed in a cold pot, which contains tallow at a low temperature. Then, the Roofing Tin Plate is washed to remove excess tin before being dried.