Boosting Manufacturing Efficiency with 35S20 Steel Grade

The specification of 35S20 steel grade for boosting manufacturing efficiency includes its mechanical properties, chemical composition, and other relevant factors. This steel grade is known for its high tensile strength, good wear resistance, and excellent machinability.

1. Mechanical Properties:
– Tensile Strength: The typical tensile strength of 35S20 steel grade is around 500 MPa.
– Yield Strength: The yield strength is approximately 320 MPa.
– Elongation: The steel grade exhibits a minimum elongation of 15%.
– Hardness: The hardness of the steel grade is typically in the range of 160-200 HB.

2. Chemical Composition:
The chemical composition of 35S20 steel grade may vary slightly based on the manufacturer and specific requirements. However, the general composition is as follows:
– Carbon (C): 0.32-0.40%
– Manganese (Mn): 1.20-1.70%
– Silicon (Si): 0.15-0.35%
– Sulphur (S): 0.20-0.35%
– Phosphorus (P): 0.03% max
– Chromium (Cr): 0.35% max

Other Factors:
In addition to these core mechanical properties and chemical composition, other factors like heat treatment and surface finish can also impact the manufacturing efficiency of 35S20 steel grade. Specific heat treatment processes, such as quenching and tempering, can further enhance the mechanical properties and improve the overall performance of the steel. Additionally, a smooth and controlled surface finish can minimize friction and reduce manufacturing defects.

By considering these specifications, manufacturing processes can be optimized to achieve greater efficiency and productivity when using 35S20 steel grade for various applications.
35S20 Steel grade
1698390860