Rising to the Challenge: C36 Steel Grade’s Journey to the Top

Rising to the Challenge: C36 Steel Grade’s Journey to the Top

Mechanical Properties:

– Tensile Strength: The C36 Steel Grade exhibits a high tensile strength ranging from 510 MPa to 620 MPa. This indicates the steel’s ability to withstand pulling forces without undergoing deformation or breaking.
– Yield Strength: With a minimum yield strength of 360 MPa, the C36 Steel Grade demonstrates its ability to resist permanent deformation or plasticity under applied stress.
– Elongation: The steel grade’s elongation percentage ranges from 16% to 20%, showcasing its ability to stretch without fracturing when subjected to tension.
– Hardness: The C36 Steel Grade possesses an average hardness of approximately 170 to 200 HB, signifying its ability to withstand indentation or penetration from external forces.

Chemical Composition:

– Carbon (C): The C36 Steel Grade contains a carbon content of 0.32% to 0.39%, providing the steel with enhanced strength and hardness.
– Manganese (Mn): With a manganese content of 0.50% to 0.80%, the C36 Steel Grade exhibits improved hardenability and wear resistance.
– Silicon (Si): The steel grade incorporates a silicon content of up to 0.35%, contributing to its strength and corrosion resistance.
– Phosphorus (P) and Sulfur (S): The C36 Steel Grade contains low levels of phosphorus (maximum 0.045%) and sulfur (maximum 0.045%), ensuring good weldability and machinability.
– Chromium (Cr): The steel grade may contain chromium in small quantities, usually up to 0.25%, to enhance its corrosion resistance and durability.

Overall, the C36 Steel Grade’s mechanical properties and chemical composition make it a versatile and reliable choice for various applications requiring high tensile strength, yield strength, hardness, and good weldability. Its journey to the top is attributed to its exceptional performance and ability to meet the challenges posed by demanding industrial environments.
C36 Steel grade
1699067489