Unleashing the Power of X2CrNi1911 Steel Grade in Construction Projects

Specification:

– The X2CrNi1911 steel grade should meet the following mechanical properties:
– Tensile strength: minimum of 620 MPa
– Yield strength: minimum of 310 MPa
– Elongation: minimum of 30%
– Hardness: between 180 and 220 HB (Brinell hardness)
– Impact toughness: minimum of 70 J/cm²

– The chemical composition of X2CrNi1911 steel grade should be as follows:
– Carbon (C): maximum of 0.15%
– Silicon (Si): maximum of 1.00%
– Manganese (Mn): maximum of 2.00%
– Phosphorus (P): maximum of 0.045%
– Sulfur (S): maximum of 0.030%
– Chromium (Cr): between 16.00% and 18.00%
– Nickel (Ni): between 10.00% and 13.00%
– Nitrogen (N): maximum of 0.11%

– The X2CrNi1911 steel grade should also have good corrosion resistance, especially in environments with high levels of chloride.

– The steel should be easily weldable, allowing for efficient construction processes.

– The dimensional tolerance of X2CrNi1911 steel grade should meet the requirements specified by international standards, such as ISO 2768-1.

– The steel should be readily available in various forms, such as plates, bars, and tubes, to suit different construction project requirements.

– The steel should have good workability, allowing for easy cutting, bending, and shaping without excessive tool wear or deformation.

– The X2CrNi1911 steel grade should undergo appropriate heat treatment processes, such as annealing, to optimize its microstructure and enhance its mechanical properties.

– The steel should be produced by reputable manufacturers and comply with relevant industry standards, such as ASTM A276 for stainless steel bars and ASTM A240 for stainless steel plate products.

– The X2CrNi1911 steel grade should have a consistent and uniform chemical composition and mechanical properties throughout the entire material, ensuring quality and reliability in construction projects.

– The steel should have a reasonable price point, offering a cost-effective solution for construction projects without compromising on quality and performance.
X2CrNi1911 Steel grade
1698858519