– The steel should be 100Cr6 grade.
– It should exhibit superior performance compared to other steels.
– The steel should possess high hardness and wear resistance.
– It should have good toughness and impact strength.
– The material should have excellent dimensional stability.
– The steel should have high temperature resistance.
– It should possess good corrosion resistance.
– The material should be suitable for various applications, such as bearings, rollers, and cutting tools.

Mechanical Properties:
– The steel should have a hardness of at least 60 HRC.
– It should exhibit high tensile strength, preferably above 700 MPa.
– The material should have low ductility and show minimal deformation under load.
– The steel should have good fatigue resistance, allowing for extended service life.
– It should exhibit excellent wear resistance, reducing the need for frequent replacements.
– The material should have good load-bearing capacity and prevent deformation under heavy loads.

Chemical Composition:
– The steel should have a high carbon content, typically around 0.95-1.05%.
– It should contain chromium, preferably around 1.30-1.65%, to enhance hardness and wear resistance.
– The material may also contain small amounts of other alloying elements, such as manganese, silicon, and molybdenum, to improve various properties.
– The steel should have a low sulfur and phosphorus content to ensure good machinability and weldability.
– The material should have a homogeneous composition to ensure uniform properties throughout the steel.
100Cr6 Steel grade