Address
304 North Cardinal St.
Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
Unveiling the Strength and Durability of 10SPb20 Steel Grade
Specification:
– Steel Grade: 10SPb20
– Material Type: Low carbon steel with lead addition
– Manufacturing Process: Hot rolled or cold drawn
– Standard: DIN EN 10277-3
Mechanical Properties:
– Tensile Strength: 550-750 MPa
– Yield Strength: 320-550 MPa
– Elongation: 10-20%
– Hardness: 140-190 HB
– Impact Strength: 20-30 J
– Young’s Modulus: 200 GPa
– Poisson’s Ratio: 0.3
Chemical Composition:
– Carbon (C): 0.17-0.23%
– Silicon (Si): 0.17-0.35%
– Manganese (Mn): 0.80-1.20%
– Phosphorus (P): 0.15% max
– Sulfur (S): 0.35% max
– Lead (Pb): 0.15-0.35%
– Iron (Fe): Remaining balance
Note: The above mechanical properties and chemical composition are approximate values and may vary depending on the specific manufacturing process and supplier. It is recommended to refer to the relevant standards and consult with the manufacturer or supplier for precise information.
10SPb20 Steel grade
1698247774